此機型為LeCroy 針對Bluetooth
HCI 信號擷取所設計的HCI Probe . 採用RS232介面連結 , 與PC端使用USB控制 , 簡易設定即可操作
, 主要說明如下 :
| The HCITracer
functionality provides means to record serial HCI
traffic (RS232, UART or BlueCore HCI interfaces)
utilizing the CATC Trace analysis software. The
HCI probe can be used in several configurations:
plugged into a USB port of the host PC or connected
to serial ports of the host PC. Up to three (3)
HCI probes can be simultaneously connected on a
single LeCroy analyzer system.
All HCI traffic is displayed using the CATC Trace
software interface, which is the de facto industry
standard for documenting the performance of high-speed
serial protocols. Information captured by the
HCI probe is analyzed and decoded at the following
protocol levels: HCI, L2CAP, SDP, RFCOMM, TCS,
OBEX, HDLC, BNEP, PPP, AT, HCRP, IP, TCP, UDP,
HID, AVCTP, and AVDTP.
|
|
|
|
