1394
Wireless
Storage/SAN
PCI Express
InfiniBand
USB Series
Accessory


您的位置: Lecoln > 產品介紹 > PSG

TA Series, PCI and PCI-X

 

Analyzers/Exercisers/Compliance Testing
 TA850
型錄下載

TA700
型錄下載

TA700C
型錄下載

TA700PDC
型錄下載

TA Series
程式下載

  • Accessory 包括

  • Development Platform TST-660

  • Adapters

  • MINI-PCI
  • PCI Right-Angle
  • Standard PCI
  • PCI-to-MINI
  • PCI-to-PMC
  • PMC-to-cPCI
  • PMC-to-PMC
  • cPCI 3U and 6U

    Extenders

  • PCI/PCI-X
  • PCI Short Height
  • PMC
  • cPCI 3U and 6U

    • Catalyst TA Series 提供全系列 PCI / PCI -X 協定分析儀 , 包括了 PCI  , PCI -X , Compact PCI , PMC ..等功能及規範 , 並提供大量Adapter and Extender , 以符合開發及測試時所需 . 功能及機型說明如下

    Compliance Test

    All TA Series products provide an automated PCI Compliance Test Suite, which is designed to help confirm a device's conformance to the PCI Specification. These tests are operated by the user through the GUI, and provide a pass/fail report to the user upon completion. Each test executed is saved in Catalyst's trace view, so the user can easily investigate failed tests in a familiar format. Well over 100 tests are available, for testing across several areas, including component configuration, device control, device status, base addresses, VGA devices, and general component protocol testing.


    Auto Compliance Test Suit

    Timing Analysis

    Most TA Series products provide two timing modes, including a detection utility to isolate setup & hold violations on the bus as well as an asynchronous high-speed capture feature. For detection of setup & hold violations, the TA Series provides an effective 100ps resolution to precisely characterize individual signal violations. A second setup & hold utility provides a one-click characterization of worst-case setup & hold characteristics across the entire bus. The asynchronous timing mode over-samples the bus at 1.5ns (664MHz), providing the user with the ability to debug general timing issues, such as race conditions


    Setup and Hold setting

    Performance Analysis

    The TA Series performance feature is a graphical analysis tool designed to characterize dozens of bus operational metrics instantly, and in real-time. Many pre-defined measurements are provided, or the user can easily create custom measurements, including various selections for chart displays (bar, line, pie, stacked, etc.). Selections are available to characterize the entire bus, or to select specific devices for characterization. Performance bottlenecks are quickly isolated. Bus utilization, target and master efficiencies, and other bus parameters are instantly accessible for real-time display.

    Performance Characterization

    The real-time performance analysis can also be operated in conjunction with the exerciser, allowing the user to characterize a design under precisely controlled conditions. For example, the exerciser may be used to loop through a script of read commands, while the performance analysis utility reports on average completion latency. Metrics include bus utilization, throughput, idle time, and other important characteristics.

    Protocol Error Detection

    The TA Series provides automatic protocol error detection capabilities for both PCI and PCI-X protocols. A total of over 100 protocol error trigger points are provided. As errors are detected, they are displayed in the capture, identified by error type, described in detail, and referenced to the specification. The exerciser can optionally be operated in conjunction with the protocol error detection, allowing the user to force conditions that may result in non-compliant bus activity.


    Protocol Error Detect

    Dual-Mode GUI

    All TA Series products provide a dual-mode GUI approach, offering the user a convenient choice of an easy-to-use interface, suitable for most common analysis and debug tasks, or an advanced mode, offering sophisticated and powerful features for tackling more complex issues. In the easy mode, ideal for most tasks, the analyzer, exerciser, performance, and timing mode functions are executed quickly and easily through very straightforward, easily understood menu selections. In the advanced mode, control of these same functions is greatly expanded for the user, with powerful low-level control of all processes, including a user-programmable 32-level state sequencer with plenty of conditional logic for precise control of the capture/trigger process and advanced exerciser features


    Easy Mode

    TA850 Low-Profile PCI/PCI-X Analyzer/Exerciser

    Operates from DC to 133 MHz. Supports 3.3V and 5V signaling environments. Solaris Driver. Ethernet, USB 2.0 interface.

    TA700 PCI/PCI-X Analyzer/Exerciser

    Operates from 20 MHz to 100 MHz. Includes pass-through auxiliary top connector. Supports 3.3V and 5V signaling environments. Timing modes include 100ps setup-hold violation detection and 664 MHz asynchronous timing. 4M Sample capture memory option. Parallel port and USB 1.x interface.

    TA700C CompactPCI

    PCI/PCI-X Analyzer/Exerciser. Operates from 20 MHz to 100 MHz. Supports 3.3V and 5V signaling environments. Timing modes include 100ps setup-hold violation detection and 664 MHz asynchronous timing. 4M Sample capture memory option. Parallel port and USB 1.x interface.

    TA700PDC PMC

    PCI/PCI-X Analyzer/Exerciser. Operates from DC to 66 MHz. Auxiliary, stackable top connector. Supports 3.3V and 5V signaling environments. Parallel port and USB 1.x interface